DEVELOPMENT OF A MODEL FOR SUSTAINABLE ENERGY CONSUMPTION OF HEATING VENTILLATION AIR CONDITION INSTALLATIONS OF HOTELS IN OWERRI,IMO STATE NIGERIA

1.1Background to the Study

Buildings contributes a very high energy consumption percentage compared to other economic sectors. Although these percentages vary from country to country, buildings are accounts  for  about  30±45%  of  the  global  energy  demand.  With  increasing  urbanization (higher in developing countries), the number and size of buildings in urban areas will increase, resulting in an increased demand for electricity and other forms of energy commonly used in buildings (Michael Laar and Friedrich Wilhelm Grimme, 2002).

In many countries, buildings consume more energy than transport and industry. The International Energy Agency (IEA) statistics estimate that globally, the building sector is responsible for more electricity consumption (42%) than any other sector. The building sector encompasses a diverse set of end use activities, which have, different energy use implications. Space heating, space cooling and lighting, which together account for a majority of building energy use in industrialized countries, depend not only on the energy efficiency of temperature control and lighting systems, but also on the efficiency of the buildings in which they operate. Other factors include; the building designs and materials, which have a significant effect on the energy consumed as well as the selection of the set of end use facilities (IEA, 2004).Among Building services, the growth in Heating Ventilation and Air Conditioning (HVAC) system energy use is particularly significant, contributing 50% of building consumption and 20% of total consumption in the USA (Perez-lombard, Ortiz, and Pout, 2008).

In a sustainable perspective it is of great importance that the energy use stays on a low level the entire lifetime of the building and not only when it is newly built or reconstructed. In order to fulfill the requirement of low energy use over time the factors influencing the energy use need to perform well even in a long perspective (Swedish National Energy Administration, 2001).

,Q VSLWH RI WKH HQYLURQPHQWDO SUREOHPV FRQQ

of the service standards in buildings are much higher now than in the past. In other words,

growth in population, enhancement of building services and comIRUW OHYHOV WRJH ULVH LQ WLPH VSHQW LQVLGH EXLOGLQJV KDYH U

WUDQVSRUW DQ-LGo mbLarQd eGt aXl, V20W08U). \It h as al3sopbeUenHo]bserved the increasing rate of installation of HVAC installations in building which have now become almost essential in parallel to the spread in the demand for thermal comfort, considered a luxury not long ago. Therefore, it is important to also focus on the usage of energy.

The growing trend in building Energy consumption will continue during the coming years due to the expansion of built area and associated energy needs, as long as resources and environmental exhaustion or economic recession allows it. Therefore, private initiative together with government intervention through the promotion of energy efficiency, new technologies for energy production, limiting energy consumption and raising social awareness on the use of energy will be essential to make possible a sustainable future (Luis et al, 2008)

The energy used by a building is broadly determined by the building fabric, the building VHUYLFHV DQG WKH PDQDJHPHQW RI WKH EXLOGLQ

Moreover, with growing global concern for environmental sustainability, it is imperative to SURPRWH VXVWDLQDEOH GHVLJQ HQKDQFH EXLOGL

impact (Okafor, Hassan, and Awal, 2008).Energy is used in buildings for various purposes: heating and cooling, ventilation, lighting and the preparation of hot sanitary water. In residences and Public buildings, installed equipment and appliances require energy, as do removable devices like mobile phone chargers and portable computers. However, identification of fixed and fluctuating demand for energyrarely appears in a bXLOGLQJ¶V FRQVXPSWLRQ PHWULF  DV P total amount consumed by the whole building (Sunikka, 2006)

In non-domestic buildings, the type of use and activities make a huge impact on the quality and quantity of energy services needed. Nonresidential building include the Public Building

as well as the industrial buildings which account for a large amount of the energy consumption in the building sector (Energy Information Administration, International Energy, 2006)

According to the National building (NEC) Code (2006) Public Buildings are defined as buildings to which the public is admitted such as assembly halls and theatres, places of worship, etc. taking into consideration the required facilities for the physically challenged persons.

This is consistent with the definition given by the Guideline on the Application of Health

 SXEOLF EXLOGLQJ   5HJXODWLRQ RI $XVWAUDOLD

building or place or part of a building or place where persons may assemble for :(i) civic, theatrical, social, political or religious purposes;(ii) educational purposes;(iii) entertainment, recreational or sporting purposes; and (iv) business purposes. An Alternative Definition Stated by the same Australia Health Act, defines Public building as any building, structure, tent, gallery, enclosure, platform or other place or any part of a building, structure, tent, gallery, enclosure, platform or other place in or on which numbers of persons are usually or occasionally assembled, but does not include a hospital.

Public building services (such as: air-conditioning, lighting, fire protection, cabling and telecommunication) is an essential element of every building nowadays. In spite of the pressing need for a sustainable Energy consumption in buildings, it is necessary to accommodate these services and consider the needs of the occupants

$FFRUGLQJ-L omWbaRrd et 3alp(U20H08]),  there  has  been  the  intensification  of  energy consumption in the HVAC systems, which has now become essentially in parallel to the spread in the demand for thermal comfort which is no longer considered a luxury as it use to be. It is the largest energy end use both in the residential and Public Buildings sectors, comprising heating, ventilation and air conditioning. Its predominance is obvious compared with other energy end uses in the building.

However, in Nigeria, most of the efforts are channeled towards developing sustainable energy generation processes with little or no attention given to the energy consumption end uses and the amount these end uses. Therefore, identifying the major end uses of the energy generated

and proper management thereof, ought to be given similar attention for potential energy saving in the building sector for sustainability. Thus, this study is timely as Nigeria is currently experiencing serious energy crisis and massive energy wastage which is accompanied with the environmental depletion.